Southern office: 020 8464 0915 / Northern office: 0161 308 4550
Need expert advice??
Are you looking for advice on how to efficiently heat your workplace / premises? Then please use our free online site survey tool to correspond today with one of our experts.
Customer testimonials
Oxted Colour Printers - Surrey
“Fantastic job! Harry Taylor could not have been more helpful. Very tidy and excellent work."
KEF Audio -
“Many thanks for a great job. The engineers were most helpful and provided great support.”

ECP Evaporative cooler - Down discharge

Energy efficient cooling of people and buildings

Meets all European safety regulations
Cabinets are UV stabilised and corrosion free
Simple, safe and low cost
Environmentally friendly cooling
Lower capital cost than air conditioning
Ecocoolers consume 85% less electricity than conventional air conditioning systems
ECP down discharge evaporative cooler
General product information:
This evaporative cooler is manufactured in an ISO 9002 quality environment. Designed to meet all European electrical, water and other safety legislation.

The cabinet components are injection moulded structural foam polypropylene. The cabinets are UV stabilised and corrosion free.

Cooling pads :
Cooling pads are Munters CelDek honeycomb, saturation efficiencies in the range of 85% - 89% Munters CelDek 680x850x100mm, four pads total area 2.3m2 with integral insect screen.
Motor / Fan motors:
Water: Supply minimum 1 bar max 7 bar. Minimum supply 500 L/HR. Sump capacity 23L.

Electrical supply: 240V 50hz. 12A start 8A running. External isolator fitted as standard.

Drain: Minimum capacity 2000l/hr to an appropriate drain point in accordance with local water regulations.

Circulation pump: 50W, 30L/min, centrifugal, encapsulated, shaded pole magnetically coupled, auto rest overload.

Dimensions: Height 950mm, length 1170mm width 110mm, volume 1.3m3.

Weight: Dry 55kg operating 92kg. The cooler is designed to be supported from a plain edged vertical duct.

Duct: Length 645mm x Width 645mm.

Control: Wall control supplied with 30m cable. Can be connected to thermostat to give automatic control. Facility to connect to timer, humidistat and fire alarm contact. Internal relay to drive external fan. Integrated comissioning sequence and maintenace/cleaning sequence.
Refer to seperate documentation for details.

Warranty: Two years: Parts only subject to coolers being maintained by Harry Taylor service engineers.
Related products:______________
© All images and content property of Harry Taylor of Ashton Ltd unless otherwise stated.
Click here to read the Harry Taylor of Ashton privacy policy.