




Maidstone








Nominally rated at 14,000m3/hr this evaporative cooler is manufactured
in an ISO 9002 quality environment. Designed to meet
all European electrical, water and other safety legislation.
Based upon an ECPD a stainless steel fan transition element is fitted to the top. A further stainless steel blanking plate is used to seal the existing venturi position.
Duct can be fixed to the steel element or to the 600mm internal diameter venture.

Installation
The cooler can be supported either from the duct or from the corners of the sump. The ductwork from the cooler must be completely self supporting. The fan venturi must not be used to carry any load.
Click here to read the Harry Taylor of Ashton privacy policy.