Southern office: 020 8464 0915 / Northern office: 0161 308 4550
Need expert advice??
Are you looking for advice on how to efficiently heat your workplace / premises? Then please use our free online site survey tool to correspond today with one of our experts.
Customer testimonials
Oxted Colour Printers - Surrey
“Fantastic job! Harry Taylor could not have been more helpful. Very tidy and excellent work."
KEF Audio -
“Many thanks for a great job. The engineers were most helpful and provided great support.”

ECM Mobile cooler

Energy efficient cooling of people and buildings

Meets all European safety regulations
Cabinets are UV stabilised and corrosion free
Simple, safe and low cost
Environmentally friendly cooling
Lower capital cost than air conditioning
Ecocoolers consume 85% less electricity than conventional air conditioning systems
ECM Mobile evaporative cooler
General product information:

Producing a flow rate of up to 7,000m3/hr this evaporative cooler is manufactured by Harry Taylor Ltd in an ISO 9002 quality
environment. Designed to meet all European electrical, water and other safety legislation.

Cabinet: The cabinet components are stainless steel.

Cooling pads: Cooling pads are Munters Celdek honeycomb, saturation efficiencies in the range of 85-89 % Munters CelDek 680x850x100mm, three pads total area 1.7m2

Mounted on four braked castors the cooler is designed to be operated on a flat surface in a well ventilated area.

A double deflection grill allows the air to be directed.

A two speed fan, together with the option of cooling or vent mode, gives flexibility to respond to cooling needs.

> All stainless steel construction
> CelDEK pads – High efficiency 85%
> Quality double deflection grill
> Easy clean
> High air flow
> Easy drain – facility for gravity or
pumped drain
> Easy maintain and Repair
> Duct connection facility
> Single phase, two speed 700W motor
> Direct drive- no belts or pulleys
> Low profile- can fit through single door

> Safe – fully guarded
> Humidifier option
> Built in lifting handles
> Built in tie down points
> Strong castors, two fixed,
two swivel/brake
> Electronic pump Run dry
> 2 year warranty
> Fully draining sloping sump
> 90L sump
> Low voltage controls
> IP65  main control box

Water: Manual fill or mains supply. ( 1 bar max 7 bar. Minimum supply 300 L/hr. Sump Capacity 90L
Electrical supply: 240V 50Hz. 6A start 3A running.
Circulation pump: 50W 30L/min, Centrifugal, Encapsulated, Shaded Pole.Magnetically Coupled, Auto reset overload.
Two years: parts only
© All images and content property of Harry Taylor of Ashton Ltd unless otherwise stated.
Click here to read the Harry Taylor of Ashton privacy policy.